High-security quick folding gate with certified vehicle restraint
The EntraQuick PU30 is a crash-tested quick folding gate with an integrated, certified stopping system for high-security access points. Tested in accordance with IWA 14-1 and PAS 68, it withstands a 7.5-ton vehicle impact at 48 km/h and provides defined vehicle restraint under realistic test conditions.
Despite its integrated protective structure, the system delivers fast opening and closing speeds, combining physical security with controlled vehicle access management. The EntraQuick PU30 is designed for security-critical infrastructure and serves as a key component within comprehensive perimeter protection concepts.
The EntraQuick PU30 is deployed wherever access points must not only be controlled but physically secured against deliberate vehicle breaches. As a quick folding gate tested in accordance with IWA 14-1 and PAS 68, it meets defined requirements for certified vehicle restraint and provides verified resistance against vehicle-borne impact attack scenarios.
The integrated stopping structure functions as an active protective system against unauthorized vehicle intrusion. At the same time, the quick folding technology enables short opening and closing times, allowing high-security access points to operate efficiently.
The system can be deployed as a standalone high-security element or as part of a multi-layered perimeter protection concept. Its robust locking mechanism ensures a defined security status in closed position and supports a clearly structured security architecture.
Certified protection of access points with elevated threat levels and defined vehicle restraint
| EntraQuick® PU30 (single leaf) | |
| Crash test certification | Impact energy 222 kJ (2.5 t @ 50 km/h) Certified according to PAS 68:2013, IWA 14-1:2013 penetration P1 |
| Gate height | 2050 mm, 2550 mm and 3050 mm (incl. 100 mm ground clearance) |
| Clear width (CW) | 2000 mm – 4000 mm (in 500 mm increments) |
| Gate infill | Bar infill made of square hollow section SHS 30 (max. 120 mm clear distance) |
| Finish | Hot-dip galvanised (standard, with cover panels in RAL 7035); Optional powder-coated |
| Weight | Approx. 1450 kg (for maximum applicable dimension) |
| Lowered foundation | Top edge of foundation 200 mm below finished floor level |
| Operating speed | Max. 0.5 m/s; depending on CW |
| Locking | Active locking (via actuator and tension rods) Locking/release time approx. 3 sec. |
| Drive | Electro-mechanical in combination with joint mechanism |
| Control unit | Automatic control (maintained command) WE-Tronic II with frequency converter |
| Emergency operation | By manual release of drive arm and unlocking of locking bolt |
| Temperature range | Control unit / Locking actuator: -10 °C … +50 °C; Drive: -45 °C … +50 °C |
| Optional add-ons | Serrated top edge, induction loops, traffic lights, LED spot lights, key safe, fence connection systems, heater |
,,
Find the right protection for your needs.
The EntraQuick PU30 is suitable for access points with elevated threat levels where certified vehicle restraint in accordance with international standards is required. It combines controlled vehicle access management with physical protection against deliberate vehicle attacks and unauthorized breach attempts.
The EntraQuick PU30 has been tested in accordance with IWA 14-1 and PAS 68 and withstands a 7.5-ton vehicle impact at 48 km/h. The exact classification according to the respective test standard is documented and specified on a project-specific basis.
Despite its integrated stopping structure, the EntraQuick PU30 delivers fast opening and closing times. The locking mechanism is engineered to maintain a defined security status and ensures reliable protection in the closed position. The locking time is approximately 3 seconds. The gate opens at speeds of up to 0.5 m/s, depending on the clear width.
Yes. The EntraQuick PU30 has been tested and certified in accordance with recognized standards such as IWA 14-1 and PAS 68. The tests confirm defined vehicle restraint under specified impact conditions, making the system suitable for high-security access points.
In the event of a power failure, the defined security status is maintained. The system does not open uncontrollably and can be equipped on a project-specific basis with emergency or backup solutions to ensure operational continuity.
The EntraQuick PU30 can be configured on a project-specific basis. Available options include different control variants, integration into security management systems, LED signaling, specialized coatings, and additional security-relevant features.
Yes. The system is designed for integration into existing access control and security concepts. This connectivity enables controlled, traceable, and fully documented vehicle access management within a comprehensive security architecture.
The product images shown are for illustrative purposes only and may vary in design and specific details.
