Proven impact protection and efficient access control for critical Infrastructure
The EntraQuick Strong M40 redefines the standard for protecting sensitive areas. It combines the mechanical resilience of a high-security product with the rapid operating cycles of a modern folding gate. By absorbing a kinetic energy of 1185 kJ, the system ensures seamless site protection against unauthorized vehicle breakthroughs without compromising logistical processes.
The security of the EntraQuick Strong M40 is based on an integrated, high-strength wire rope arrest system and a massive bolt interlocking between the folding leaves. According to simulations, this construction can effectively stop a vehicle weighing 7.5 t at an impact speed of 64 km/h.
Thanks to an opening and closing speed of up to 1.0m/s, the system minimizes open times, preventing unauthorized vehicles from following, also known as “tailgating.” The robust construction made of square hollow sections is specifically designed for high-frequency continuous operation and allows for seamless integration into existing perimeter security systems.
Securing access points with increased threat potential and defined vehicle impact resistance.
| EntraQuick® Strong M40 (double-leaf) | |
| Crash Test Certification | Impact Energy 1185 kJ (7.5 t @ 64 km/h)
Verified via vehicle impact simulation |
| Gate height | 2050 mm, 2550 mm and 3050 mm (incl. 100 mm ground clearance) |
| Clear width (CW) | 4000 mm – 8000 mm (in 1000 mm increments) |
| Gate infill | Bar infill made of square hollow section SHS 30
(max. 120 mm clear distance) |
| Finish | Powder-coated (standard)
Optional in other RAL colors |
| Weight | approx. 3200 kg (for maximum dimensions) |
| Lowered foundation | Individual post foundations
Top of foundation = Top of roadway |
| Operating speed | Max. 1.0 m/s; depending on clear width (CW) |
| Locking | Bolt interlocking between the folding leaves
Locking/unlocking time approx. 1 sec. |
| Drive | Electro-mechanical drive |
| Control unit | Automatic control (maintained command) WE-Tronic II NXT with frequency converter |
| Emergency operation | By manual release of drive arm and unlocking of locking bolt |
| Temperature range | Control unit / Locking actuator: -10 °C … +50 °C;
Drive: -45 °C … +50 °C |
| Optional add-ons | Serrated top edge, induction loops, traffic lights, LED spot lights, key safe, fence connection systems, heater |
,,
Find the right protection for your needs.
The system’s resistance has been proven by a vehicle impact simulation. The gate is structurally designed to absorb a kinetic energy of 1185 kJ, which corresponds to the impact of a 7.5-ton truck at a speed of 64 km/h.
The EntraQuick® Strong M40 can be manufactured for clear passage widths from 4,000 mm to 8,000 mm (in increments of 500 mm or 1,000 mm). Standard gate heights available are 2,050 mm, 2,550 mm, and 3,050 mm.
In the event of a power failure, the gate is equipped with a mechanical emergency manual operation. The system can be operated by manually decoupling the motor arm and unlocking the locking bolt to release or secure the access point.
Yes, the EntraQuick product family is proven for use in all climate zones. The control unit is designed for a temperature range of -10°C to +50°C, while the drive itself operates in a range of -45°C to +50°C. An additional heater for the control unit and the linear drive is available as an option.
The EntraQuick Strong M40 achieves an operating speed of up to 1.0 m/s. Upon closing, mechanical locking via the bolt takes place within approximately 1 to 3 seconds, thereby ensuring that the premises are fully secured again immediately after passage.
Yes, the gate can be adapted to the surroundings with various infills. Powder coating is available as standard in common RAL colors such as Moss Green (6005), Anthracite Gray (7016), or Light Gray (7035), with custom colors available upon request.
The product images shown are for illustrative purposes only and may vary in design and specific details.
Important: Maintenance
Today, April 24, 2026, we are unavailable via email and phone from 12:00 PM to 1:30 PM (CET) due to maintenance. We will be back to assist you as usual starting at 1:30 PM.
Thank you for your patience!
Heute, den 24.04.2026, sind wir aufgrund von Wartungsarbeiten von 12:00 bis 13:30 Uhr vorübergehend nicht per E-Mail oder Telefon erreichbar. Ab 13:30 Uhr sind wir wie gewohnt wieder für Sie da.
Vielen Dank für Ihr Verständnis!
You need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More InformationYou need to load content from Turnstile to submit the form. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from Vimeo. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from Google Maps. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More Information
